Cleaning Green Pool Water - Get Rid of the Awful Green Fast!

Cleaning Green Pool Water - Get Rid of the Awful Green Fast!

I'm sure a lot of pool owners are sharing the common problem and daunting task of cleaning green pool water. This task shouldn't be so daunting if the correct steps in pool maintenance are religiously followed.

As what we now know, chlorine based shock is the best chemical to use when dealing with algae growth in your pool's surface. When you constantly maintain adding shock to your pool, it makes the environment not suitable for microorganisms like algae to grow and when there is a lurking growth already, it quickly kills the algae.

Usually, the common dosage of shock in every pool is 1 lb. per 10,000 gallons of water which should be increased to 1 lb. per 7, 500 gallons to make cleaning green pool more effective since the increased dosage will help eliminate the algae.

Remember further that shock tablets or granules should be first dissolved in a separate bucket of water before adding it to the pool. Shock treatment is never added directly to the pool - doing so will only stain your pool's surface.

After you have added shock to your pool, leave the pool for at least 24 hours - this should be enough time for the algae to be killed. The chlorine level should always be maintained at 1 to 3 ppm to make sure no algae growth will happen again.

However, it is not enough to just add shock to the pool. First, you will have to scrub the pool's surface to get rid of any clinging algae so cleaning green pool water will be a breeze later on.

Also, the pool's filter system should be running while the shock treatment is left to kill the algae. The combination of both will make clearing up the pool quicker.

Remember that the filters should also be on for 24 hours or more and during these 24 hours, continue to monitor the filters and then backwash it as necessary once the pressure reaches 10 psi. Backwashing is done to clean the filter thus making it more efficient to make cleaning green pool water faster.

When all these steps are done, proceed to check the pool's chemistry. The pH should only fall between 7.2 to 7.8, alkalinity is between 80 to 120 ppm, free chlorine between 1 to 3 ppm and calcium hardness should be from 200 to 350 ppm. When any of these elements are either low or high, you can always add up a chemical to balance them. Consult your nearest pool supplies store about this and ask for detailed steps.

To sum it all up, the key to really avoid the horrific green in your pool is proper maintenance. With that, then cleaning green pool water will never become a problem.